Front Panel Operation - AMC iMIX 63 User Manual

Operation

Front panel operation

INDICATION
These green LEDs indicate audio signal in the input.
VOLUME COMBO XLR
These rotary knobs are for adjusting volume level of the universal mono inputs.
First six inputs can be use as balanced line level as well as microphone level
inputs. The phantom power can be activated for these inputs separately in rear
panel. The input gain selector is located in the rear panel too.
VOLUME STEREO RCA
These rotary knobs are for adjusting volume level of the line level RCA inputs.
Input 7, 8 and 9 are line level, unbalanced, stereo inputs.
MONITOR
This is volume control for adjusting audio level in the balanced monitor output.
In this output can be linked audio from the combo inputs.
MONITOR ON/OFF BUTTON
If this button is in the "ON" position, all combo inputs are linked in to monitor
output. At this moment only input 7, 8 and 9 are available in the master, mono
and rec. outputs. When the button is off, all inputs are linked in to main, mono
and rec. output, at this moment monitor output is inactive.
05 USER MANUAL iMix 63 Stereo mixing preamplifier
EQUALIZER
3 band: low, mid and high equalizer. Center frequency of the "LOW" tones
equalizer is 80Hz, adjusting level 10dB. The "MID" tones can by adjusted in 10dB
range. Center frequency 2.5kHz. "HI" tones are ready to be adjusted in 10dB
range. Center frequency – 12kHz.
MONO
This volume control is designed to adjust volume level in the balanced mono
output. If monitor button is "ON", in this output are available audio from stereo
RCA inputs only.
LED BAR INDICATOR
This is level indicator of the master output.
MASTER
This potentiometer is designed to adjust audio level in the master output.
"POWER ON" INDICATOR
This LED indicates status. LED indicates if preamplifier is turned on.
POWER BUTTON
Designed to turn on/off main power.