Figure 3-2 Connecting The Ethernet Cable - Zte ZXSDR R8119 Hardware Installation

ZXSDR R8119 Hardware Installation

Figure 3-2 Connecting the Ethernet Cable

2. Connect the other end of the Ethernet cable to the Ethernet electrical interface of the
Pbridge, which is a remote convergence unit.
Bind the cable with cable ties orderly, reserve an equal distance between every two
cable ties, with a proper tension and towards the same direction. Cut up extra ties
smoothly and cleanly.
3. Root and bind the cable.
4. Stick a label on the cover of the ZXSDR R8119 and write information on the label to
indicate the port and Pbridge that the ZXSDR R8119 is connected.
For example, PB1-PORT1 indicates that the ZXSDR R8119 is connected to the first
port on the first Pbridge.
– End of Steps –
SJ-20150805085318-002|2016-08-18 (R1.3)
Note:
3-2
ZTE Proprietary and Confidential