Installing The Device On A Concrete Ceiling; Figure 2-9 Mounting The Zxsdr R8119 - Zte ZXSDR R8119 Hardware Installation

ZXSDR R8119 Hardware Installation

Figure 2-9 Mounting the ZXSDR R8119

– End of Steps –

2.3 Installing the Device on a Concrete Ceiling

When installing the ZXSDR R8119 against a cement ceiling, ensure that the distance
between the plastic shell top of the ZXSDR R8119 and the ceiling is not less than 40 mm.
This requirement can be met through the wall-mount fixture between the ZXSDR R8119
and the cement ceiling.
Note:
For non-cement ceilings, for example, irremovable plasterboard ceiling and PVC board
ceiling, you must fix a wooden bar on the ceiling. For how to install the wooden bar, refer
to "Figure
self-tapping screws.
Context
For the installation components, refer to the following table.
Component
Two-point hanging plate
SJ-20150805085318-002|2016-08-18 (R1.3)
2-15". It is not allowed to fix the two-point hanging board to the ceiling by using
Quantity
1
Overview
2-8
ZTE Proprietary and Confidential