Figure 2-1 Wrapping The Slide-Proof Rubber Mat Around The Pole; Figure 2-2 Securing The Two-Point Mounting Plate To The L-Shaped Bracket - Zte ZXSDR R8119 Hardware Installation

Figure 2-1 Wrapping the Slide-Proof Rubber Mat Around the Pole

2. Secure the two-point mounting plate to the L-shaped bracket with two
countersunk-head screws (M5 × 25) and two wing nuts and washers, see

Figure 2-2 Securing the Two-Point Mounting Plate to the L-shaped Bracket

3. Install the L-shaped bracket and the Pole holder on the pole and tighten the screws,
see Figure
SJ-20150805085318-002|2016-08-18 (R1.3)
2-3.
2-3
Chapter 2 Installing the ZXSDR R8119
ZTE Proprietary and Confidential
Figure 2-2.