Figure 2-5 Securing The Two-Point Mounting Plate To The L-Shaped Bracket; Figure 2-6 Drilling Holes - Zte ZXSDR R8119 Hardware Installation

ZXSDR R8119 Hardware Installation
Figure 2-5 Securing the Two-Point Mounting Plate to the L—shaped Bracket
2. On the wall, mark locations for drilling holes based on the hole positions of the
L-shaped bracket, and drill four holes at the marks with an electric drill. The holes
must be at least 55 mm deep, see

Figure 2-6 Drilling Holes

3. Hammer the expansion tubes into the holes with a rubber hammer, see
SJ-20150805085318-002|2016-08-18 (R1.3)
Figure 2-6.
2-6
ZTE Proprietary and Confidential
Figure 2-7.