Electrolux EOB6631AOX User Manual page 36

36 www.electrolux.com
Problem
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The lamp does not oper‐
ate.
The core temperature sen‐
sor does not operate.
There is water inside the
oven.
The steam cooking does
not work.
The steam cooking does
not work.
It takes more than three
minutes to empty the water
tank or the water leaks
from the steam inlet open‐
ing.
It takes too long to cook
the dishes or they cook too
quickly.
Steam and condensation
settle on the food and in
the cavity of the oven.
The display shows "C2".
Possible cause
The necessary settings are
not set.
The automatic switch-off is
activated.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
The plug of the core tem‐
perature sensor is not cor‐
rectly installed into the
socket.
There is too much water in
the tank.
Lime obstructs the hole.
There is no water in the
tank.
There are lime deposits in
the oven.
The temperature is too low
or too high.
You left the dish in the
oven for too long.
You want to start the De‐
frost function, but you did
not remove the core tem‐
perature sensor plug from
the socket.
Remedy
Make sure that the settings
are correct.
Refer to "Automatic switch-
off".
Refer to "Using the Child
Lock".
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
Replace the lamp.
Put the plug of the core
temperature sensor as far
as possible into the socket.
Deactivate the oven and
wipe the water with a cloth
or sponge.
Check the steam inlet
opening. Remove the lime.
Fill the water tank.
Clean the water tank. Re‐
fer to "Cleaning the water
tank".
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
Remove the core tempera‐
ture sensor plug from the
socket.