Foot Switch; Buffer Tray; 8.2.1 Double-Walled Buffer Tray S - Leica VT1000 S Instructions For Use Manual

8. Ordering Information: Spare Parts, Accessory, Consumables
8.1

Foot switch

Fig. 34
8.2

Buffer tray

8.2.1 Double-walled buffer tray S

When using the double-walled buffer tray, the flow cooler must be installed according
to the assembly instructions prior to working with specimens.
Fig. 35
32
Foot switch
• The foot switch is an optional accessory
which can be used instead of the START/STOP button.
Order No. .....................14 0463 27415
11 11
2
Fig. 36
A clamp for holding the gassing hose for the
buffer in the proper position can be added to
the double-walled buffer tray.
First connect the hoses (2, included in the stan-
dard delivery of the double-walled buffer tray)
to the rear of the Julabo Recirculating Cooler/
Chiller FL300, then connect the other end to the
empty buffer tray. Access is easier if you make
the left connection first. To do so, pull back the
lock coupling, attach the hose, and release the
coupling until you hear it click into position.
• Hose set for connecting a recirculating
cooler/chiller included.
Order No. .......................................14 0463 46423
Instructions for Use, V 2.3 RevK – 09/2018