Electrical Specification - JinkoSolar JKM***P-60 User Manual

f) When cleaning the modules, it is not allowed to stand on the module. See below pictures
shown, this is prohibited.
g) Never use chemicals when cleaning modules as this may affect the module warranty and
energy output.

5. Electrical specification

The module electrical ratings are measured under Standard Test Conditions, which are
2
1000W/m , irradiance with AM 1.5 spectrum and 25 deg (77° F) ambient temperature. The
module might produce more or less voltage or current than rated value in uncertainty
condition. Tables below are electrical characteristics of PV products at STC and the tolerance
of Isc, Voc, Vmp and Imp is ± 10%.
- 21 -
Rev. C