JinkoSolar JKM***P-60 User Manual page 15

method, please be sure to use at least four clamps on each module, two clamps should be
attached on each long side of the module. The applied torque value should be big enough to
fix the modules steadily (Please consult with the clamp or support‟s supplier for the specific
torque value). Please find detailed mounting information in the below illustration, the
mounting place distance is suggested bigger than J and less than K, as showed below.
1)Half-cut
Figure 3: half-cut installed at long side with Clamp fitting method
Module type
Group 2
Group 5
Group 8
Group 11
Table 1 above: Mechanical dimensions when modules installed at long side with Clamp
Cell type Cell quantity
6 inch Poly 6*20
6 inch Poly 6*24
6 inch Mono 6*20
6 inch Mono 6*24
- 13 -
Dimension(mm)
A*B J
400
1665*992 & 1684*1002
1987*992 & 2000*992
400
& 2008*1002
400
1665*992 & 1684*1002
1987*992 & 2000*992
400
& 2008*1002
Rev. C
K
420
480
420
480