Bowflex HVT Service Manual page 34

6. Push the Release Tab away from the Servo Motor while supporting
the Brake Assembly.
7. Now slightly shift the Servo Motor toward the front of the machine
while still supporting the Brake Assembly. As the Brake Assembly is
released, allow it to gently pivot downward.
Note: Note how components are attached to assist with re-assem-
bly.
Release Tab
Brake
Assembly
Servo Motor
8. With the Brake Assembly released and pivoted downward, slide it
out of the Pivot Housing. Note the angle the Brake Assembly must be
held at to slide it into or out of the Pivot Housing.
Pivot Housing
34