Search For Rain Sensor; Factory Restart - La Crosse Technology 724-2310 Instructional Manual

Search for Rain Sensor

• Press and release the SENSOR button to view the sensor ID for up to
20 seconds.
• While viewing ID, hold the SENSOR button for 3 seconds to search
for the rain sensor.
• The sensor reception icon will animate until the sensor signal is
received, or for 3 minutes, if there is no signal available.
• If the station loses connection with the sensor for more than 10
minutes, it will automatically begin searching for the lost sensor for
2 minutes.
• If the station hasn't received the sensor's signal after 30 minutes, it
will again perform a search, this time for 3 minutes."
• If the station still hasn't received the sensor's signal after 60
minutes, it will perform another 3 minute search, and then continued
3 minutes searches every 30 minutes after that until the reception is
found.

Factory Restart

A Factory Restart returns the station to its default settings (erases
history) and to "out of the box" condition.
1. Be sure you have fresh batteries in sensor and station.
2. Bring the sensor within 15 feet of the station.
3. Hold the SENSOR and RESET buttons together for 5 seconds to
reset the station.
4. Keep sensor close to station for 15 minutes, to sync properly.
5. After 15 minutes, return the sensor to its outdoor location.
724-2310 www.lacrossetechnology.com/support/ Page | 12