Search For Rain Sensor; Search For Temperature Sensor; Position Rain Sensor; Position Temperature Sensor - La Crosse Technology 724-1710v2 Instructional Manual

Search for Rain Sensor

Hold the RAIN button for three seconds.
The rain reception icon will flash while searching for
the sensor.
The reception icon will be solid when connected to
rain sensor.

Search for Temperature Sensor

Hold the DOWN arrow button for three seconds.
The temperature area will flash dashes.
Temperature reading = connected.
Position Rain Sensor TX23R
1. Mount in an open area for a more accurate rain count.
2. Install the Rain sensor on a level platform that is stationary.
3. Insert two mounting screws (not included) through the holes in
the base of the rain sensor.
4. Ideally, the Rain sensor should be mounted at least 6 ft in the
air and have a direct line of sight to the display.
5. The rain sensor should be accessible to allow for periodic
cleaning of debris or insects.
6. The maximum wireless transmission range to the rain station is
over 300 feet (91 meters) in open air, not including walls or
floors.
Position Temperature Sensor TX23T
1. Mount the Outdoor Sensor on a north-facing wall or in any
well shaded area. Under an eave or deck rail is preferred.
2. Insert one mounting screw (not included) through the hole
at the top of the outdoor sensor.
3. The maximum wireless transmission range to the rain station
is over 300 feet (91 meters) in open air, not including walls or
floors.
4. Be sure the outdoor sensor is mounted vertically.
Page | 13 724-1710v2 www.lacrossetechnology.com/support