Table of Contents
Advertisement
Search for Rain Sensor
If you are seeing "NO" or dashes for your rain readings, please try the
following steps:
1.
Hold the
SENSOR
Indicator
2.
If after 3 minutes the sensor still isn't connected, bring the sensor inside next to
the display and remove power from both the sensor and station.
3.
Press any button on the station 20 times and leave the parts sit for a few
moments with the power off.
4.
Install a new set of alkaline batteries into the sensor, then into your station.
5.
If your outdoor data is still not appearing after these steps, please contact our
support staff. For additional help visit:
Care & Maintenance
When batteries of different brand or type are used together, or new and old batteries are used
together, some batteries may be over-discharged due to a difference of voltage or capacity. This can
result in venting, leakage, and rupture and may cause personal injury.
•
Do not mix Alkaline, Lithium, Standard, or Rechargeable battteries.
•
Always purchase the correct size and grade of battery most suitable for the intended use.
•
Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or
batteries of different types.
•
Clean the battery contacts and also those of the device prior to battery installation.
•
Ensure the batteries are installed correctly with regard to polarity (+ and -).
•
Remove batteries from product during periods of non-use. Battery leakage can cause corrosion
and damage to this product.
•
Remove used batteries promptly.
•
For recycling and disposal of batteries, and to protect the environment, please check the
internet or your local phone directory for local recycling centers and/or follow local government
regulations.
button to search for the rain sensor. The Reception
will begin to animate.
bit.ly/basic_restart.
9
Advertisement
Table of Contents
