KROHNE VFM 1091 I Installation And Operating Instructions Manual page 15

Using keys in programming mode
Key Main menu level
Select main menu
Enter displayed
Main menu
Quit programming
Mode and go back
To measurement
Mode
Newly entered data will be saved in non-volatile memory and accepted by measuring program only after termination of programming mode as
described below.
Pressing the key at main menu level quits the programming mode. Before exiting programming mode, device updates the configuration
according to the changes done in the menu.
®
Programming using HART
While in the measuring mode the communicator displays the measured values of flow, the computed current output value and Qmax, Qmin
values programmed into the device. Using the communicator, you can see / modify many of the device parameters. For details of using HART
Communicator please refer the HART
reference. Please refer 6.2.12 for details of HART
Submenu
Function level
Select submenu or function
Enter displayed submenu
(execute) function
Return to main menu
or submenu
based communicator
®
Communicator manual. The Generic Online Menu of the communicator is given in 6.2.14 for your quick
®
programmability.
Data level
Option/Units
select next
Proposal
Select displayed
proposal and return
to function level if no
further data entry is
required by the
function
Numerical values / strings
Change flashing digit or
Character Proposal
Shift flashing digit or
character position
Enter the displayed numerical
value or alphanumerical
string. Then return to
function level if no further
required by that function
®
15