Installer Setting -Ceiling Height Selection - LG CL09R.N20 Installation Manual

OPTIONAL OPERATION
26

Installer Setting -Ceiling Height Selection

This function is to adjust FAN Airflow rate according to ceilingheight (only cassette model)
<Ceiling Height Selection Table>
Ceiling Height Level
01 Low
02 Standard
03 High
04 Super high
* Ceiling height setting is available only for some products.
* Ceiling height of 'Super high' function may not exist depending on the indoor unit.
* Refer to the product manual for more details.
1
2
3
Function Code Thermistor setting
4
5
Decrease the indoor airflow rate 1 step from standard level
Set the indoor airflow rate as standard level
Increase indoor airflow rate 1 step from standard level
Increase indoor airflow rate 2 steps from standard level
If pressing button long for 3
seconds, it enters into remote controller
setter setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If moving to ceiling height selection menu by
pressing button, it indicates as picture below.
Select ceiling height value by pressing
button. (01:Low, 02:Standard,
03:High, 04Very high)
Press button to save.
Pressing button will exit settings mode.
❈ After setup, it automatically gets out of setup
mode if there is no button input for 25
seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.
Description