How To Set E.s.p; Installer Setting -E.s.p - LG CL09R.N20 Installation Manual

HOW TO SET E.S.P?

32
HOW TO SET E.S.P?

Installer Setting -E.S.P.

This is the function that decides the strength of the wind for each wind level and because this
function is to make the installation easier.
- If you set ESP incorrectly, the air conditioner may malfunction.
- This setting must be carried out by a certificated-technician.
Function code,
ESP code
ESP value
- When setting ESP value on the product without very weak wind or power wind function, it may
not work.
If pressing button long for 3
1
seconds, it enters into remote controller
setter setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If entering into ESP setup mode by using
2
button, it indicates as the picture below.
Select ESP fan step by pressing
3
button. (01: very low, 02: low, 03:
medium, 04: high, 05: power)
Move to ESP value setting by pressing
4
button.
(It is 000 when delivering
from the warehouse.)
5
Press button to setup ESP value.
(It is possible to setup ESP
value from 1 to 255, and 1 is the
smallest and 255 is the biggest.)
ESP step
Function Code ESP value