Assembling - PROAIM Kite-22 Instruction Manual

Proaim Kite-22 Popular Package
ASSEMBLING THE REAR FRAME

Take the two 16mm thick rods and
two 25mm thick rods. Attach these
rods altogether so that it makes a
rectangle and for this insert the 16mm
rods into slots of 25mm rods.

Attach the Allen bolts by screwing in with hand and tighten with Allen key at all the four
points to secure properly.

Align the threads of joystick plate with the threads of the 1mm rods and tighten the Allen
bolts with Allen key.
11