2. Press a Source button/pushbutton or the Multiview button/pushbutton to
assign a source to the focused display. The pushbutton for the selected
source lights green.
Note:
For combo ports (Source 1 and 2), HDMI sources are prioritized as the
output for the ports. To change the priority, configure the Source settings in
the OSD. For details, see System Settings, page 28. To manually change
the output source of a combo port, press the Display button/pushbutton and
then press the Source button/pushbutton twice. The pushbutton for the
selected source lights green.
For details on multiview, see Configuring the Multiview, page 21.
VP2730 User Manual
15