Table of Contents
Advertisement
Pack Synchronization
It is possible to synchronize presets and sequence activation across up to four SmartLink
host products when they are connected on a SmartLink network. SmartLink connected
products share various configuration parameters and events, known as host messages, as
sent from the host product. Reference
SmartPack
P r e s e t a n d S e q u e n c e S y n c h r o n i z a t i o n
Default functionality is that the last SmartPack or SmartSwitch updated in the system acts
as the host product and sends its host messages to the other SmartLink enabled products
in the system. Each product (SmartPack and SmartSwitch) will retain its own preset and
sequence configuration as programmed but when a host product is selected each
SmartLink enabled product will activate and play its sequence with the number of steps and
timing (fade up, fade down, hold time) as sent by the host product.
P r e s e t S y n c h r o n i z a t i o n
Selecting a preset on any pack affects the same numbered preset to run on all inter
connected SmartLink enabled products simultaneously.
If "Preset 1" is activated from the facepanel of a SmartPack:
That SmartPack will act as the host product and send its host messages to the other
SmartLink enabled products in the system to activate "Preset 1". The preset will activate
with the same fade up time, hold time, and fade down time as sent from the host product.
S e q u e n c e S y n c h r o n i z a t i o n
Activating a sequence on any pack causes all connected SmartLink enabled SmartPack
and SmartSwitch products to run the same sequence in lock-step synchronization using the
host product fade up, hold, and fade down times. In addition, sequence loop "yes" or "no"
will be sent from the host product to all inter-connected SmartLink enabled products to
ensure lock step synchronization.
If the sequence is activated from the facepanel of a SmartPack:
That SmartPack will act as the host product and send its host messages to the other
SmartLink enabled products in the system. Each SmartLink enabled product in the system
will activate the sequence as sent from the host product with steps and timing
synchronized. If one product in the system does not have specific step recorded and the
host product sends the message to play that step, the receiving product will simply ignore
that command and pick up with the next recorded event.
2
SmartLink™ Enabled
SmartSwitch
Portable
page 18
for host messages defined.
SmartPack
Belden 8471
Presets, Sequence,
Sequence timing
DRd12
19
Hide quick links:
Advertisement
Table of Contents
