Advanced Menu Structure; Dmx - ETC SmartPack User Manual

Advanced Menu Structure

Enter the Advanced menu from the Normal Menu:
The Advanced menu provides all access to the menu and configuration settings for the
SmartPack.
Step 1:
Step 2:
Step 3:
D M X
DMX Start Address
The start address range is determined by the size of your SmartPack. When a DMX Start
Address is selected as the active DMX Mode, the DMX range will be displayed on the LCD.
DMX: 001 > 012
Level:
DMX Start Address range
• A three channel unit allows a start address range of 001-510.
• A six channel unit allows a start address range of 001-507.
• A twelve channel unit allows a start address range of 001-501.
Step 1:
Step 2:
Step 3:
Step 4:
DMX Patch
DMX Patch allows the user to patch different DMX numbers to selected dimmers. This
menu is to be used when setting the
is selected as the active DMX Mode, "DMX Patch" will be displayed on the LCD.
Level:
Step 1:
Step 2:
Step 3:
1
Menu's and Configuration
Scroll to General Settings, press
Scroll to Menu Mode, press
Scroll to Advanced Menu, press and hold
return to the main menu when the Advanced Menu has been accessed.
• If the is released prematurely the menu will remain in Normal Menu
mode.
Scroll to DMX, press
Scroll to DMX Start Address, press
Use + or - to increment or decrement the Start Address range. Press
address and return to the previous menu.
Press < to return to the previous menu or press << to return to the main menu.
The specified DMX range will display on the LCD.
DMX Patch
Scroll to DMX, press
Scroll to DMX Patch, press
Use + or - to increase dimmer channel. Dimmers will be numbered 1-6 or 1-12
depending on the SmartPack channel count. Initially the DMX address will patch
consecutively with the dimmer channel. If the DMX address should differ from the
channel number, press
.
for 5 seconds. The display will
.
.
DMX Start Address is not sufficient. When DMX Patch
.
.
.
to set the
9