Sequencer - ETC SmartPack User Manual

Setup Preset Timing
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Activate a Preset
Step 1:
Step 2:
Step 3:
Step 4:
Deactivate a Preset
If a Preset is active, the control symbol located in the top right corner of the LCD will display
the preset number and the P symbol. To deactivate the preset:
Step 1:
Step 2:
S e q u e n c e r
The built in sequencer in SmartPack plays a series of recorded presets sequentially.
The order of execution is based on the first preset and the length is determined by the
number if steps configured for the sequence. Fade Up, Fade Down and Hold Times are
determined in the preset menu and may be different for each preset. The sequence can be
set to loop continuously or stop after only one occurrence.
Setup a Sequence
Step 1:
Step 2:
Step 3:
Step 4:
1
Menu's and Configuration
Scroll to Presets menu, press
Scroll to Setup Timing, press
Press + or - to scroll the presets list. Press
Press + or - to increase or decrease the Fade Up minutes. Press
selection will change to the seconds field.
Press + or - to increase or decrease the Fade Up seconds. Press
[min]:03 will display.
Repeat steps 4 and 5 for Fade Down. Press
Repeat steps 4 and 5 for Hold Time. Press
Scroll to Presets menu, press
Scroll to Activate Preset and press
Press + or - to scroll the list of presets. Press
"Preset ## Run Instant?" will display briefly.
a: To run the preset with its programmed Fade Up and Fade Down times,
ignore the "Run Instant?" message. The display will return to the previous
menu after a few seconds of display.
b: Press to complete the preset in the default time of 3 seconds. The display
will default to the previous menu.
Scroll to Presets menu, press
Scroll to Deactivate Preset and press
then returns to the previous menu.
Scroll to Sequencer, press
Scroll to Setup Sequence, press
Use + or - to select the number of steps to be included in the sequence (up to
32). The Sequencer will play the steps in series with preset one as step one
always. Press , Loop: [NO] will display.
Scroll to select [Yes] to continuously loop the sequence or [No] to play the
sequence only once and then stop. Press
.
. Setup Timing, Preset / Step: [##] will display.
, Fade Up [min]:03 will display.
. Hold Time [min]:00 will display.
when done.
.
, Number [##] will display.
to select a preset.
.
. "Preset Deactivated" will display briefly
.
.
.
. The
. Fade Down
11