Main Axis Not At 100 Degrees; If You Are Still Receiving The Error Message - Husqvarna Viking Platinum MN 1000 User Manual

MAIN AXIS NOT AT 100 DEGREES

1
2
When your main access is not at 100 degrees, an error
message will be displayed on your screen.
1. Click OK.
2. Press the 100-degree button (1).
IF YOU ARE STILL RECEIVING THE ERROR
MESSAGE
1. Clear the message from the screen.
2. Turn off the embroidery machine.
3. Rotate the degree knob (2) at the back of the
embroidery machine to 100 degrees.
4. Press the 100-degree button (1).
NOTE: If you are still experiencing issues, please contact your local
dealer where you made your initial purchase.
48 – MAINTENANCE & CARE