Embroidery Process; Completing A Flat Design (Start To Finish); Prepare; Embroider - Husqvarna Viking Platinum MN 1000 User Manual

EMBROIDERY PROCESS

COMPLETING A FLAT DESIGN
(START TO FINISH)

PREPARE

1. Select the desired embroidery hoop. See the Embroidery hoop specifications
section.
2. Place the fabric with backing onto the embroidery hoop. See the Framing
fabric section.
3. Install the flat hoop support. See the Flat hoop support installation section.
4. Insert the USB into the USB port on the right side of the panel. See the
Importing/uploading a design section.
5. Make sure the embroidery status is set to unlocked. See the Embroidery
status section.

EMBROIDER

6. Click on the file icon (1).
7. Select your design.
8. Press the machine icon alongside the blue arrow to import the design into the
embroidery machine's memory (2).
9. Now select the machine icon on the top row (3).
10. The last imported design will be the last one in the list. Select the desired
design.
11. Press OK.
12. Click on the design set button (4).
13. Select the embroidery hoop selection icon on the bottom right (5).
14. Select the preset embroidery hoop size.
15. Press OK.
16. Press Close.
17. Press the color sequence setting icon (6).
18. Choose the colors of your design.
19. Press OK.
20. Trace your design to make sure that it fits within the embroidery hoop and to
check its placement (7). See the Embroidery design trace section.
21. Press Start (8) to begin embroidering your design.
42 – EMBROIDERY PROCESS
1
2
3
4
5
6
7
8