ACCESSORIES
1. Screwdriver
2. Felt pad (x2)
3. Seam ripper/brush
4. Bobbins (x4)
5. Spool cap large
6. Spool cap small
7. Edge/Quilting guide
8. Auxiliary spool pin
INCLUDED ACCESSORIES (NOT PICTURED)
• Needles
• Foot control
• Power cord
PRESSER FEET
Utility Foot A
7
Attached on the machine upon delivery. This foot is used mainly for straight stitching and zigzag stit-
ching with a stitch length longer than 1 mm.
Presser Foot B
7
For sewing close zigzag stitches (satin stitches) with less than 1.0mm stitch length, other utility stitches
or decorative stitches, use this foot. The tunnel on the underside of the foot is designed to feed smoo-
thly over the stitches.
Buttonhole Slider Foot C (model Onyx 25)
This foot has a space in the back to set the size of the buttonhole. The machine will sew a buttonhole
to fit that button size.
Buttonhole Foot C (model Onyx 15)
For manual buttonholes. This foot has guidelines to determine buttonhole length. The middle gui-
deline measures ½" (12mm) from the needle position. The two tunnels on the underside of the foot
ensure smooth feeding over the buttonhole columns. The finger on the back of the foot holds cording
for corded buttonholes.
2
1
4
5
7
3
6
8
Introduction – 3