EXCELL PRECISION CO., LTD.
2-3-1 Weighing Mode
Ⅰ. Units Selection
Press the
key to select the desired weighing unit.
UNITS
There are 13 units available: g, ct, lb, oz, dr, GN, ozt, dwt, MM, tl.J, tl.T, tl.H and t.
Ⅱ. Display Mode/Resolution Selection
Non-approval models: Press the
Approval models: Press the
Ⅲ. Tare Function
1. Place the container on the platter. After stable, press the
weight. The display returns to zero and the tare indicator
2. Place the object into the container, and the net weight of the object is displayed.
3. Remove the container and the object from the platter, and the negative value of the container
weight is displayed. Press the
The balance can be tared continuously up to its full capacity.
If the tare indicator
Please press the
For Sri Lanka approval model(s), you can only tare once.
BH3 Series (02024013)
UNIT
key to shift between Display Unit Weight Mode and
WT
Display pcs Mode.
HR
key to shift weighing resolution between normal resolution and
high resolution.
T
key again to re-zero and the tare indicator is off.
T
is still on, after pressing the
→0←
key to zero the balance, and the tare indicator
ON
T
key to deduct the container
T
is on.
T
key to exit the tare mode.
12
T
will go off.
ZSME300000289