Removing Side Cover - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.5

Removing Side Cover

Remove Side Cover when installing or removing the following component or change internal cable connection:
Optical disk drive,
DIMM,
TPM,
PCI card,
Power supply unit
Dust Proof Bezel with Sensor
Flash backup unit for RAID controller,
1. See steps 1 to 4 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Loosen Cap Screw on the rear of Side Cover.
3. Hold Side Cover and move it toward the rear of the server.
4. Pull Side Cover to remove from the server.
Processor,
Additional HDD cage,
5.25-inch device,
RAID controller,
Fan unit,
Express5800/T120g User's Guide
1. Installing Internal Optional Devices
45