Table of Contents
Advertisement
Chapter 2 Preparations
1.4
Removing the Side Cover
Remove the side cover by using the following procedure.
1.
Refer to steps 1 to 3 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Unlock the padlock attached to the chassis if applicable.
3.
Remove the two screws at the rear of the chassis.
4.
Hold the side cover securely and remove it.
5.
Lay it so that the right side of the cover faces downward.
Lay it down slowly and gently.
Remove the front bezel before laying it down if
applicable.
Express5800/GT110d User's Guide
1. Installing Internal Optional Devices
43
Advertisement
Table of Contents
