NEC Express5800 Series User Manual page 124

Chapter 2 Preparations
4. Hold the drive carrier firmly and insert it
into the slot.
5. Slowly close the handle.
The drive carrier is locked making a clicking sound.
6. Turn on the server, start the SETUP utility, and then specify the boot order from the Boot menu. For
details about the Boot menu, see Chapter 3 (2. System BIOS Setup).
124

Push it all the way until the handle's lock touches the frame.
Note

Hold the drive carrier firmly with both hands.
Note When you push the drive into the slot, confirm the handle got hooked on the frame.
The saved boot order is cleared when a hard disk drive is added.
Tips
Express5800/T120g User's Guide
1. Installing Internal Optional Devices