Chapter 2 Preparations
1.20.2
Removal
Remove a hard disk drive in the following procedure.
If you transfer or dispose of the removed hard disk drive, you must erase the stored data completely.
1. See Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Push the lever to unlock and open the
handle.
3. Hold the drive carrier firmly and pull out the
hard disk drive.
Important
NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
Note
If you have to remove a disk due to a hard disk drive failure, check the slot with its
DISK LED lit in amber.
2.5-inch hard disk drive
3.5-inch hard disk drive
Express5800/T120g User's Guide
1. Installing Internal Optional Devices
DISK LED 2 (amber)
DISK LED 1 (green)
DISK LED 1 (green)
DISK LED 2 (amber)
125