Glossary - NEC Express5800 Series User Manual

Chapter 4 Appendix
3.

Glossary

Terms
BIOS Setup Utility (SETUP)
BMC
BMC RESET Switch
DUMP Switch
EXPRESSBUILDER
EXPRESSSCOPE ENGINE 3
EXPRESSSCOPE Profile Key
Express Report Service
Express Report Service (HTTPS)
Express Report Service (MG)
ExpressUpdate
ExpressUpdate Agent
Flash FDD
Internal Flash Memory
NEC ESMPRO
NEC ESMPRO Agent Extension
NEC ESMPRO Manager
NEC ESMPRO ServerAgentService
OEM driver
OS standard installer
Offline tools
PC for Management
Product Info Collection Utility
RAID Configuration Utility
Server Configuration Utility
Starter Pack
TPM Kit
Universal RAID Utility
Windows OS parameter file
168
Software for setting BIOS. You can run this software by pressing <F2> key during
POST.
Baseboard Management Controller (BMC) is a built-in controller that supports the
IPMI version 2.0 protocol. BMC can manage the server hardware.
A switch for resetting the BMC of the server. This resets the BMC without clearing the
BMC settings.
Use the switch if the problem on the BMC occurs.
A switch that is used for collecting the memory dump if an error occurs. You can
specify the destination of the dump by using the OS function.
Standard software for setting up the server easily. This also includes several useful
applications and instruction manuals.
A name of BMC for NEC Express5800 series.
A removable flash memory that stored the settings of BIOS and BMC. If the
motherboard of the server is replaced, you can use former settings when moving this
flash memory from the former motherboard.
Software that can report the server failure to the contact center by E-mail or modem.
This software is installed with NEC ESMPRO ServerAgentService to the server.
Software that can report the server failure to the contact center by HTTPS. This
software is installed with NEC ESMPRO ServerAgentService to the server.
Software that can report the server failure to the contact center by E-mail, modem or
HTTPS without NEC ESMPRO ServerAgentService. This software is installed with
NEC ESMPRO Manager to "PC for Management".
A feature for updating BIOS, firmware, driver, or software of the server. This feature is
available when NEC ESMPRO Manager cooperates with EXPRESSSCOPE ENGINE
3 and ExpressUpdate Agent.
Software for performing ExpressUpdate. This is installed to the server.
An optional USB device that can use as a floppy disk drive.
A built-in flash memory that stored EXPRESSBUILDER as standard. You can start
EXPRESSBUILDER from it without DVD when pressing <F3> key during POST.
Standard software for the server management. This consists of several applications
for managing or monitoring.
Software for performing the scheduled operations. This works with NEC ESMPRO
Manager.
Software for managing plural servers on network.
Software for monitoring the server. This works with NEC ESMPRO Manager. You can
choose Service Mode or Non-Service Mode when installing this software. Service
Mode resides as the OS service and Non-Service Mode does not use the OS service
to reduce memory, CPU power and other OS resources.
A Windows driver for the mass storage device.
An installer that stored in Windows installation disc. Use this installer if you want to
install the OS manually.
Software that can confirm or change SEL, SDR, FRU, and other IPMI data. You can
start Offline tools when pressing <F4> key during POST.
A computer for managing the server on network. A general Windows/Linux computer
can be used as "PC for Management".
Software for collecting several hardware/software statuses or event logs. You can
easily collect the data for the server maintenance by using this software.
Software for configuring RAID arrays. You can run this software during POST.
Software for setting BIOS or BMC. You can use as Windows application or run this
software when pressing <F4> key during POST. This software is the same as BMC
Configuration of former models.
Software package for the server. This software includes the customized drivers for
Windows. This must be installed before using Windows on the server.
An optional product of Trusted Platform Module for the server.
Software for setting RAID arrays on Windows/Linux. This software is operated on "PC
for Management" with NEC ESMPRO Manager.
A file that saved settings for installing Windows. You can install with the saved
settings in this file when setting Windows with EXPRESSBUILDER.
Express5800/T120g User's Guide
Description
3. Glossary