Electrical Connection - Miele CM 5300 Operating Instructions Manual

Electrical connection

Before connecting the coffee machine,
make sure that the connection data on
the data plate (voltage and frequency)
matches the domestic electrical supply.
This data must correspond in order to
avoid the risk of damage to the coffee
machine. Consult a qualified electrician
if in any doubt.
The connection data is given on the
data plate. The data plate can be seen
on the left-hand side of the appliance
when the drip tray is pulled out.
The appliance is supplied with a mains
cable ready for connection to an AC
50 Hz 220–240 V supply.
The coffee machine must be connected
to the mains supply via a suitable
switched socket with earthing contact.
The machine must be connected to an
electrical system designed in
accordance with national regulations
(VDE 0100 in Germany).
The fuse rating must be at least 10 A.
The socket should be next to the
appliance and easily accessible where
possible.
Do not connect the coffee machine to
the power supply using a multi-socket
adapter or an extension lead. These do
not guarantee the required safety of the
appliance (risk of fire).
Do not connect the coffee machine to a
stand-alone inverter. These devices
are used for autonomous power supply,
such as a solar power system. Power
surges could cause a safety shutdown.
This can damage the electronic.
74
The coffee machine must not be used
with energy saving plugs. These
reduce the energy supply to the
appliance, which could generate
excessive heat.
If the power cable is faulty, it may only
be replaced by a qualified electrician.