Table of Contents
Advertisement
Installation
Electrical connection
Before connecting the coffee machine,
make sure that the connection data on
the data plate (voltage and frequency)
matches the electrical supply.
This data must match to avoid the risk
of damage to the coffee machine. If in
any doubt, consult a qualified
electrician.
The necessary connection data is given
on the data plate inside your appliance.
The fuse rating must be at least 15 A.
If possible, the socket should remain
easily accessible. If the socket is no
longer accessible after installation, an
additional means of disconnection must
be provided for all poles. Suitable
means of disconnection include
switches with an all-pole contact gap of
at least 1/8" (3 mm).
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronized with the grid power
supply (e.g., island networks, backup
systems) is possible. A prerequisite for
operation is that the power supply
system complies with local regulations
and standards.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be
maintained in isolated operation or in
operation that is not synchronized with
the grid power supply, or these
measures must be replaced by
equivalent measures in the installation.
As described, for example, in the
current version of VDE-AR-E 2510-2.
108
The coffee machine must not be used
with energy saving plugs. These
reduce the energy supply to the
machine, which could generate
excessive heat.
Advertisement
Table of Contents
