Electrical Connection - Miele CoffeeSelect CM 7750 Operating Instructions Manual

Electrical connection

Before connecting the coffee machine,
make sure that the connection data on
the data plate (voltage and frequency)
matches the electrical supply.
This data must match to avoid the risk
of damage to the coffee machine. If in
any doubt, consult a qualified
electrician.
The connection data is provided on the
data plate. The data plate can be found
on the left-hand side of the appliance
when the drip tray is pulled out.
The appliance is supplied with a power
cord ready for connection to an AC
220–240 V 50 Hz supply.
The coffee machine must be connected
to the power supply via a correctly
installed grounded plug. The machine
must be connected to an electrical
system designed in accordance with
national regulations.
The fuse rating must be at least 10 A.
The socket should be next to the
appliance and easily accessible where
possible.
Do not connect the coffee machine to
the power supply using a power bar or
an extension cord. These do not
guarantee the required safety of the
appliance (risk of fire).
Do not connect the coffee machine to a
stand-alone inverter. These devices are
used for autonomous power supply,
such as a solar power system. Power
surges could cause a safety shut-off.
This could damage the electronic.
106
The coffee machine must not be used
with energy saving plugs. These
reduce the energy supply to the
appliance, which could generate
excessive heat.
If the power cord is faulty, it must only
be replaced by a qualified electrician.