Sony UP-D6500 Operating Instructions Manual page 24

Printing with the Auto Card Feeder
8
When the Auto Card Stacker is installed, open the
Auto Card Stacker to remove printed cards.
Notes
• Do not open the front door, Auto Card Feeder cover
or Auto Card Stacker cover while printing. Opening a
cover stops printing.
• Do not store more than 125 cards in the supplied card
tray, as a jam could result.
• Do not put more than 125 cards in the Auto Card
Feeder, as a jam could result.
• If using the optional Auto Card Feeder, fan the cards
thoroughly to ensure they do not stick together
before loading them into the Feeder.
If cards stick together, they may not feed correctly. If
this occurs, turn the power off, remove the cards from
the Auto Card Feeder, unstack them and then return
them to the Feeder.
• Do not load different types of cards in the Auto Card
Feeder at the same time, as a jam could result.
• Do not move the printer with the Auto Card Feeder or
Stacker installed. Always remove the Auto Card
Feeder, Auto Card Stack and card tray before
moving the printer.
• Printing cannot be aborted from the computer. When
the computer sends a command to stop printing, the
card being printed finishes before the printer enters
the waiting condition.
24
Printing
To print the same image repeatedly
Send the Print command again from the computer. The
image data stored in the printer's image memory will
be printed.
When the Auto Card Feeder runs out of cards
while printing
Reload the Feeder and send the Print command again.
If multiple copies of the same card are being printed,
the remaining number prints. Cards can also be
inserted manually into the card insertion slot on the
Auto Card Feeder.
Inserting cards manually
Even with the Auto Card Feeder installed, cards can be
inserted manually one at a time into the card insertion
slot on the Feeder. Insert a card before issuing the Print
command.
Be careful to avoid inserting a card that is not the same
size as those in the Auto Card Feeder, as a jam could
result.