Sony UP-D6500 Operating Instructions Manual page 12

Installing the Ink Ribbon Cassette
5
Take up any slack in the ribbon.
To avoid damage to the ribbon during installation,
take up the slack.
6
Insert the ink ribbon holder into its installation slot,
and push until it stops.
7
Confirm that the installation was done correctly,
and close the front door.
12
Preparation
Turn the spools alternately
to remove slack.
Handling Ink Ribbons
• Do not reuse ink ribbons.
• Do not touch the surface of a ribbon, or store it in a
dusty place. Fingerprints and dust may cause
degraded printing.
Storing Ink Ribbons
• Do not store ribbons in hot or humid places.
• To preserve a partially used ribbon, save it in the
humidity-resistant bag in which it was originally
supplied.
If a Ribbon Breaks
You can repair a broken ribbon with plastic tape so
you can use the remaining unused portion.
Repair with plastic tape
Take up slack ribbon