If Parts Of The Image Do Not Print - Sony UP-D6500 Operating Instructions Manual

If parts of the Image do not Print

If the adhesive capabilities of the cleaning rollers is
degraded so that dirt cannot be remove from a card,
non-printing areas (white spots) may appear. In such
cases, clean the cleaning rollers. We recommend
cleaning the cleaning rollers after printing about every
200 cards.
1
Hold both sides of the front door and pull it
towards you.
The front door opens.
2
Pull on the part of the cleaning roller cover labeled
"PULL OPEN", and remove the cover.
3
Pull the knob on the cleaning roller holder to
remove it.
4
Remove the cleaning rollers from the cleaning
roller holder.
5
Wash the removed cleaning rollers with water, and
wipe completely so as not to attract dust.
Notes
• When wiping the cleaning rollers, make sure that
no cloth fibers remain on the rollers.
• Do not use synthetic detergent.
6
Replace the cleaning rollers as before, and close
the cleaning roller cover and the front door.
27
Appendixes