Installing The Auto Card Feeder - Sony UP-D6500 Operating Instructions Manual

Installing the Auto Card Feeder

Note
Always turn off the power to the printer when
installing or removing options.
1
Remove the manual guide for the card insertion
slot while pushing up on the knob.
2
Push down on the upper knob and remove the
connector cover.
3
Align and insert the connector and guide pins on
the Auto Card Feeder to the connector and guide
holes on the printer.
Align the connectors
Align the guide holes
Remove the upper edge first,
then the lower edge
Remove the upper edge first,
then the lower edge
4
Push the Auto Card Feeder so the connectors mate
firmly.
Installing a Second Feeder
A second Auto Card Feeder can be installed on the
UP-D6500. The second feeder installs on the outer side
of the first feeder, using the same procedure.
Removing the Feeder
To remove the feeder, open the feeder cover and push
down on the locking level while separating the feeder
from the printer.
Push firmly
15
Preparation