Add Another Device; Configure Settings In The App - Polycom EagleEye Director II Administrator's Manual

Procedure
1. On the Status screen, select an EagleEye Director II camera from the Available Devices list.
After successfully connecting, the status information displays, and you can configure settings for
the camera.

Add Another Device

In the EagleEye Director II App, you can add another EagleEye Director II camera to the available
devices list, then select that camera to connect to it.
Procedure
1. On the Status screen, select Add Another Device.
2. Enter the IP address for the camera.
The camera is added to the Available Devices list.

Configure Settings in the App

Configuration settings in the EagleEye Director II App are available for selecting the connection mode,
tracking mode, and manually using the camera controls.
Procedure
1. Select the Camera tab.
2. Select any of the following settings to configure the camera.
Setting
Mode
Tracking
Camera Control
Related Links
Configure a Connection Mode
Polycom, Inc.
on page 16
Description
Select Automatic, Group Series, or Bring
Your Own Device. The camera's connection
mode displays on the Status screen.
Select the checkbox to enable automatic
tracking. Clear the checkbox to manually
control the camera.
Disable Tracking to enable manual camera
control. Use the arrow buttons to tilt and pan
the camera. Use the plus and minus buttons
to increase and decrease the camera zoom.
Using the App
13