Using A Polycom Eagleeye Iv Camera; Replace The Eagleeye Iv Camera; Skype For Business; Enable The Camera In Skype For Business Client - Polycom EagleEye Director II Administrator's Manual

LED Light Color
Fast Blinking Blue
Amber
Alternate Amber and Blue
Blinking Amber
Green
Related Links
Troubleshooting on page 28
Perform a Factory Restore

Using a Polycom EagleEye IV Camera

Two Polycom EagleEye IV cameras are used with the EagleEye Director II camera. For available
accessories, refer to the Polycom EagleEye Director II Release Notes. For more information on the
EagleEye Digital Extender and Digital Breakout Adapter accessories, refer to the RealPresence Group
Series Integrator Reference Guide.

Replace the EagleEye IV Camera

On the EagleEye Director II camera, you can replace an EagleEye IV camera with another EagleEye IV
camera.
Procedure
1. Power off the EagleEye Director II camera.
2. Disconnect and remove the existing EagleEye IV camera.
3. Connect the desired EagleEye IV camera.
4. Power on the EagleEye Director II camera.

Skype for Business

To use the EagleEye Director II camera as a USB camera for Skype for Business calls, the client
computer requires some configuration.

Enable the Camera in Skype for Business Client

Before you can use the EagleEye Director II camera with Skype for Business, you must select it as a
video device in the client computer.
Polycom, Inc.
on page 29
Description
Adjust analytics camera status
Standby/asleep
Software update and factory restore
USB disk is plugged in
In a call
Setting Up Your Camera
9