Lilin AHD DOME Instruction Manual

AHD DOME IR CAMERA
Part Description & Dimensions
10.6
51.2
100
VIDEO OUTPUT JACK
POWER INPUT JACK (DC12V 10%)
OSD TACT SWITCH
MOUNT BRACKET
BOTTOM CASE
TOP CASE
DOME COVER
LENS
Installation
1. Remove the camera from the package and separate the top case from the
bottom case (Figure 1), and remove the mount bracket from the bottom case
(Figure 2).
2. Use the provided screws (M4.0x25, Truss head screw) to secure the
3 "a" on the mount bracket (FIG.3) and mount it on the desired position.
3. Align the camera lens with CAMERA
(
it to the mount bracket FIG.4 .
Instruction Manual
128
108.5
±
[FIG.1]
Pull up the latch in the bottom case,
and slide the mount bracket to the right.
[FIG.2]
CAMERA
FRONT
a
[FIG.3]
, and turn the bottom case clockwise to secure
FRONT
)
4. Adust the focus and zoom level of the lens for the desired object, turn
the camera to the desired angle (FIG.5), and then change the OSD menu settings.
Unit: mm
4-1. User OSD Setting
Use the tact switch to change the OSD settings (FIG.6).
: Push
1. UP
2. L : Push to move the cursor to the left and to select or adjust the parameters
of the selected item. The parameters changes each time this switch is
pushed.
3. R : Push to move the cursor to the right and to select or adjust the
parameters of the selected item. The parameters changes each time this
switch is pressed
4. DOWN : Push
5. SET : Press
with the
5. Turn the top case clockwise to secure it to the bottom case FIG.
a
Menu Map
MAIN
LENS
MENU
a
EXPOSURE
[FIG.4]
ZOOM
TILT
FOCUS
AZIMUTH
[ FIG. 5]
UP to move the cursor upwards or to select items.
L
R
DOWN to move the cursor downwards or to select items.
SET to execute selections and display a submenu for an item
mark.
[FIG.6]
[FIG.7]
MANUAL
DC MODE INDOOR
OUTDOOR
MIN SHU 1/30(1/25)
MAX SHU 1/60(1/50)~1/50000
IRIS SPEED (0~15)
SHUTTER AUTO/ 1/30(1/25)/ 1/60(1/50)/ FLK~1/50000/ X2~X30
－
AGC 0 15 ( )
~
OFF
SENS-UP
AUTO SENS-UP (X2~X30)
－
BRIGHTNESS (1~100)
66-AHD261ACSE-2
( 7).
－
－