Lilin AHD7424AX4.2 Instruction Manual

AHD IR CAMERA
Part Description & Dimension
109
105
70
80
13
Unit: mm
Installation
1. Remove the bracket from the box first. Insert the power cable and video cable through the
bracket and then secure the bracket to the wall (FIG.1 & FIG.2).
F I G . 1
2. Next, remove the camera body and open the top cover with the included hexagon
screwdriver (FIG.3).
3. Insert the power cable and video cable through the bracket rubber and then through
the bottom of camera body (FIG.4). Secure the power cable to the terminal and connect
the video cable to the video output of the camera (FIG.5).
F I G . 4
Instruction Manual
231
200
90
160
S U N S H I E L D
TO P C O V E R
B O T TO M C H A S S I S
B R A C K E T
PA N A D J U S T M E N T S C R E W
T I LT A D J U S T M E N T S C R E W
L E N S
F I G . 2
F I G . 3
Note :
When using two-cord
L N
power cable, please
connect them to
"Live" and "Neutral".
F I G . 5
4. Next, use the provided M5.0x10 screws (silver-2pcs) to secure the camera body to the
bracket with the screwdriver (FIG.6).
5. Loosen the pan and tilt adjustment screw on the bracket to turn the camera
body to the desired angle and then tighten the screw (FIG.7).
6. Tighten the screws (FIG.8) after adjusting the focus and zoom of the lens for
optimal video image.
7. Close the top cover and tighten the screws (FIG.9 & FIG.10).
F I G . 9
8. Connect to an Up-the-Coax (UTC) digital recorder that supports AHD-Coaxial
protocol. Then use the 8-directional buttons (FIG.11) to adjust settings for the
best images.
.
LEFT
8-1. USER OSD SETTING
A. (UP) : Press to move the cursor upwards or to select items.
: Press to move the cursor to the left and to select or
B. (LEFT)
adjust the parameters of the selected item.
The parameters changes each time this button is
pressed.
: Press to move the cursor to the right and select or
C. (RIGHT)
adjust the parameters of the selected item. The
parameters changes each time this button is pressed.
: Press to move the cursor downwards or to select
D. (DOWN)
items.
E. SET : Executes selections and displays a submenu for an
item with the mark.
66-AHD742ACSE-1
F I G . 6
F I G . 7
F O C U S
Z O O M
F I G . 8
F I G . 1 0
UP
SET
RIGHT
DOWN
F I G . 11