Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lilin ZG1232E
Summary of Contents for Lilin ZG1232E
-
Page 1: Quick Installation Guide
ZG1232E/1232EX3 D/N 3MP HD Auto Focus IP Camera Quick Installation Guide... - Page 2 CAUTION Do not drop or strike this equipment Do not install the equipment near any naked flames or heat sources Do not expose this unit to rain, moisture, smoke or dust environment Do not cover the opening of the cabinet with cloth and plastic or to install this unit in poor ventilated places.
- Page 4 Product Overview Unit: mm...
- Page 5 ① Lens Mount Cap ② Light Sensor ③ Microphone ④ Auto Iris Connector (4-Pin Socket) ⑤ Power LED ⑥ Live Video BNC Jack ⑦ Reset Key ⑧RJ-45 Network Connector and Indicator LEDs Green(LINK): Network connection. This LED lit. Orange(ACT): Data communications. This LED flashes. (This network camera support PoE) ⑨...
-
Page 6: Installation
Installation ● SUITABLE LENSES Lenses used must be either C or CS mount type. The protrusion behind the mounting surface must fit within the following requirements: ● FITTING THE LENS 1. Remove the lens mount cap. 2. Screw in the C mount ring until it is secured. (When using a CS mount lens, skip this step.) 3. -
Page 7: Fitting The Camera
CAUTION Keep the lens mount cap on the camera when not attaching to a lens. ● FITTING THE CAMERA 1. The mounting hole is on the top or bottom of the camera. 2. Tighten the screw to the mounting hole. Please refer to the following diagram. - Page 8 System Architectures For connecting HD IP cameras to the network, please follow one of the system architectures: (1). Use a DC12V power adapter and a network switch to connect to the network. (2). Use a PoE network switch to connect to the network. (3).
-
Page 9: Emergency Factory Default
Merit LILIN Universal ActiveX software components are required for web interface display of JPEG or H.264 Full HD video. When you login to the IP camera by Internet Explorer, the security warning dialog box will prompt the installation of the LILIN Universal ActiveX. Click Install to download it. - Page 10 IPScan software from the installation CD, and paste to your computer. Alternatively, you can execute the IPScan software from the installation CD, or download the software from the Merit LILIN website (www.meritlilin.com). To change the settings of the IP address, subnet mask, gateway, or HTTP port, you can follow the steps below: 1.
- Page 11 Configuring IP Addresses via Web Interface To change an IP address via web interface, type the default IP address (192.168.0.200) in the Internet browser and follow the steps below: 1. Login to the H.264 Full HD IP camera by the default username “admin”...
- Page 12 Once complete, you can access the IP camera’s live video by entering the default IP address via your Internet browser. As the security warning dialog box appears, click OK to download the ActiveX directly from the IP camera. Login There are two levels of user authentication, including admin and guest, that can access the IP camera.
- Page 13 The default usernames and passwords are as follows: Administrator Viewer Username admin guest Password pass guest To logon the H.264 FULL HD IP camera, please type username and password in logon HTML page and click on Submit button to enter the system.
- Page 14 66-ZG1232CSM...
Need help?
Do you have a question about the ZG1232E and is the answer not in the manual?
Questions and answers