Installation Checklist - Emerson Net Safety Millennium II Reference Manual

Installation
June 2016
Figure 2-11 Isolated terminal connection
2.6

Installation checklist

Review the following checklist prior to turning the power on to the transmitter after installation has
been completed:
□
Ensure that the transmitter and sensor are properly and firmly mounted.
□
Ensure that stopping plugs are securely tightened on any unused conduit entries.
□
Ensure that the transmitter and sensor are not obstructed; transmitter and sensor are accessible
and target gas is not inhibited from reaching the sensor.
□
Ensure adherence to applicable local guidelines and requirements on wiring and sealing of
equipment in hazardous and non-hazardous areas.
□
Ensure that proper shielding and grounding practices are adhered to and local codes are being
followed.
□
Check system operational voltage and conditions; ensuring that they are within the applicable
specifications of the transmitter and sensor.
□
Verify wiring at all termination and junction points (transmitter, junction box, and power supply).
□
Ensure that the transmitter housing cover and sensor cap are secured tightly.
12
Reference Manual
MAN-0076, Revision 09
Installation