GDD Instrumentation MPP3wifi Instruction Manual page 27

2: MEM icon/button
To record a reading, click on the MEM icon or press the MEM button of the probe. The depth
shown in Depth section will increase according to the Spacing set in the Settings menu after each
time the MEM button is pressed.
Take note that in the Punctual mode, the STAMP icon (or STAMP button of the probe) is not
activated. The MEM function records AND increments the distance simultaneously.
3: MEM number
This number corresponds to the number of the last saved reading. Each saved reading and/or
marked point (stamp) is associated to a memory number.
4: Depth section
This section shows the depth at which the next reading will be taken and recorded. The first point
is the starting Depth set in the Settings menu. After each reading/recording, the depth increases
according to the Spacing set in the Settings menu. For irregular distances between the readings, it
is possible to set the distance manually before each reading by clicking on the Depth section and
writing the depth in the pop-up window. You have to confirm the new entry by clicking on the OK
button.
Instrumentation GDD inc.
OR
2017-08-21 26