GDD Instrumentation MPP3wifi Instruction Manual page 15

Instrumentation GDD inc.
5. Open the Settings menu to set the parameters of your
project. You can also open an existing project or use the
probe in Live mode (saving option disabled).
6. Enter the name of your project, the number or the name of
the core sample, the shape of the core sample, the starting
depth and the measurement unit of the parameters.
7. Set the reading mode (Punctual or Continuous), the interval
between two recordings (for the Continuous mode only)
and the spacing between two stamps (for both modes).
Click Apply when finished.
2017-08-21 14