Table of Contents
Advertisement
3: Reading
Select the reading mode you want to use: Punctual or Continuous (see Section 11 – Reading
modes) to know how to use these two reading modes.
For the Continuous mode, enter the interval of time between two recorded readings. The Spacing
is the distance between two points marked by pressing the Stamp button.
For the Punctual mode, the Spacing is the distance between two readings recorded and marked
by pressing the MEM button.
4: Apply
Click Apply when you have finished setting the parameters.
Instrumentation GDD inc.
2017-08-21
20
Advertisement
Table of Contents
Need help?
Do you have a question about the MPP3wifi and is the answer not in the manual?