Table of Contents
Advertisement
7. Starting
*** It is highly recommended to leave the probe ON during one hour before taking the first
measurement.
Instrumentation GDD inc.
1. Turn and pull the cap of the battery holder, and insert 3 AA
batteries into the probe. Push and turn the cap to close it.
Or, plug the wall external power supply in the power jack.
2. Turn on the probe with the On/Off switch placed on the
right side of the probe.
3. Connect your device (smart phone, tablet or computer) to
®
the MPP Wi-Fi
network (corresponding to the serial
number of your MPP3wifi).
4. Open a web browser and enter the IP address
192.168.1.115 in the address bar.
2017-08-21
13
Advertisement
Table of Contents
