Table of Contents
Advertisement
6. Quick Start
1. Insert three (3) fully charged AA batteries into the probe.
2. Turn on the probe.
3. Connect your device to the MPP3wifi web application using the IP address 192.168.1.115 (Section
5.1 – Connecting your device to the MPP3wifi web application).
4. Click on the project settings icon to identify your project and set the parameters (Section 9 –
Settings).
5. Move away the probe from any conductive or magnetic material (point it in the air) and click on
INITIALIZE.
6. Take and record readings. (Section 11 – Reading modes)
7. Open the Tools menu and click on Memory to export your saved file (Section 10 - Toolbar).
Instrumentation GDD inc.
2017-08-21
12
Advertisement
Table of Contents
