Setting Up - Mitsubishi Electric 800 Series Installation Manualline

4

Setting Up

Removal of a base unit front cover (lower side)
(a) When the mounting screws are removed, the front cover (lower side) can be removed.
(b) With the front cover (lower side) removed, wiring of the main circuit terminals can be
performed.
Removal of a base unit front cover (upper side)
(a)
(a) With the front cover (lower side) removed, loosen the mounting screws on the front
cover (upper side). (These screws cannot be removed.)
(b) Holding the areas around the installation hooks on the sides of the front cover (upper
side), pull out the cover using its upper side as a support.
8 Setting Up
(a)
Loosen Loosen Loosen
(b)
(b)