Mitsubishi Electric 800 Series Installation Manualline page 11

(e)
(e) Connect the cable to the connector of the control circuit board and the connector on the
upper right of the base unit. Route the cable through this hook.
(f)
For the FR-CA80/CF80-[]-E[] control circuit board, install the earth plate.
Ethernet Ethernet Ethernet
Board Board Board
(f) Remove the mounting screw on the bottom left of the Ethernet board before installing
the Ethernet board earth plate to the base unit.
NOTE
• When a communication option is used, installation of the supplied earthing
(grounding) cable is required. For the details on how to install it, refer to the
supplied Instruction Manual (for the FR-CA80/CF80-[]-E[] control circuit board
only).
• Make sure that the screws are tightened securely.
Loosen Loosen Loosen
Insert the cable side
connector until these
hooks become level.
Fasten Fasten Fasten
Setting Up
Earth Earth Earth
plate plate plate
11